For anyone new to the sport of mountain cycling and looking to buy a cycle, understanding the labels of the available bicycles in the market and their intended riding purposes can be a bit overwhelming initially. In an effort to address this issue, the following is a listing of some of the different mountain bicycles labels with a short description of their features and intended purposes.
CROSS COUNTRY (XC)
Since the goal of cross country (XC) mountain biking is centered on endurance racing, the cross country (XC) mountain bikes are built using the lightest parts available. Some full-suspension XC cycles have weights as low as 21 pounds (9.5 kg). As a consequence of this, the XC bikes are often less durable than other types of mountain bicycles especially when used outside of their intended purposes. The suspension travel in XC mountain bicycles is usually limited having only a small amount of front and/or rear suspension (usually 65-110 mm). The idea is to only smooth out the terrain conditions rather than absorb big hits. Most of the XC cycles have only front suspension, normally referred to as hardtails and these are the types most used in XC competitions.
All Mountain (AM)
All Mountain bikes bridge the gap between cross-country and freeride bikes and typically weigh between 30 – 35 pounds (14 – 16 kg). They usually come with a suspension of about 4 – 7 inches travel. These cycles have been assigned the ?all mountain? tag because of their ability to handle the different aspects and terrains of mountain biking. They are designed to handle steep descents and moderate inclines but because of their relative heavy masses, they may not be an ideal selection for all-day rides involving steep climbs.
Freeride
Freeride mountain bikes are similar to downhill cycles but their components show a greater emphasis towards strength rather than weight. These bikes typically range in weights from 30 – 45 pounds (14 – 20 kg). The other salient feature of Freeride bicycles is that have ample suspension that typically have a minimum of 6 inches (150 mm) of travel. These bicycles are designed to be effective on technical downhill trails. Though these cycles can be ridden uphill, they are relatively inefficient.
Down Hill
The make up of a downhill bike is essentially the exact opposite of a XC setup ? the overall weight of the cycles is close to 50 pounds with extra beefy suspension which allow around 9 inches of travel. In the past few years, with the usage of lighter and more expensive alloys, the weights of downhill cycles are getting closer to the 40lbs mark (18 kg). Downhill cycles are ideal only for riding down dedicated downhill trails and race courses because of their slack geometry angles and typically large or high gears.
About the Author:
Nicholas Martens is an avid mountain biker. He has been mountain cycling for more than ten years. He owns a number of mountain bicycles and some of his favorites are yeti cycles and mongoose mountain bikes.
Read important info about the topic of golf stretching exercise – make sure to go through this web site. The times have come when proper information is truly at your fingertips, use this possibility.
Related posts:
- Guide to Mountain Bikes
- Mountain Bike Finance Will Get You The Bike You Want
- A Short Review Of Freestyle Bikes
- Training For a Mountain Bike Race
- The Bicycling Guide to Complete Bicycle Maintenance and Repair: For Road and Mountain Bikes
- Cross Country Mountain Bike Forks
- Different Types of MTB Suspension Forks Available To Purchase
- Types Of MTB Suspension Available to Buy
- Christophers Guide To Abide By If Looking At A Recumbent Bicycle
- Learn About Choices Of Bicycles, Then Pick One Thats Right For You.
